Vernon Mitchell

172

Construction labourer

Hi,

Geotechnical engineering deals with materials (e.g., soil and rock) that, by their very nature, exhibit varied and behavior due to the physical processes associated with the formation of these materials. Modeling such materials’ behavior is complicated and usually beyond... (More)

The following steps should be considered when designing a truss:

1. Selection of type and layout of the structure.
2. Determination of loads on the structure.
3. Evaluate internal forces and moments in the structural components.
4. Selection of material and proportioning of members... (More)

Concrete is primarily a sound insulator rather than a conductor. So, there’s hardly any sound passing through it. Sound passing through concrete is tested indirectly by testing the sound absorption in concrete and the sound reflection. Reflection can be tested... (More)

Following are some specific reasons for the deformation of RCC roads:

1. Spalling of joints: higher compressive stress causes the deterioration of the joint is known as spalling of joint.
2. faulting in the rigid pavement: if the difference in... (More)

self-introduction is very important in the interview because it makes the first impression of interview. Don’t tell about unnecessary things only give information short and sweet

• start with ur name
• give your place information
• education in sort
• job experience if... (More)

Formwork that leaves concrete with a smooth finish is smooth formwork, and that which leaves it with a rough finish is rough formwork.

When the formwork is removed, the concrete is never completely smooth and needs smoothening, sandblasting or grinding... (More)

repairs of honeycomb in column steps are as follow

1. clean surface by apply compressed air blow and brush application
2. now wash the surface
3. dry the surface
4. apply bonding chemical like various bonding chemical from sika and dr fix it brand.... (More)

Purpose of door and window

Circulation of human. To enter fresh air. To enter and exit from room by door.

Locations of door and window

Door and window should be away from the corner. Door and window should not be... (More)

Refractory brick is a brick that can stand against higher temperatures.

Basically, refractory brick is used in kilns, havan kund, furnace, chimney.

type of refractory brick

• High alumina brick
• Dolomite bricks
• Fire clay brick
• Magnetite brick

For more information https://theconstructor.org/building/fire-bricks-properties-types-uses/29377/12

IS code for various building construction materials are given below;

1. IS- 3935: code of practice for composite construction
2. IS- 3201: criteria for design and construction of precast concrete trusses
3. IS-2204: code of practice for construction of reinforced... (More)

Definitely, it helps me in understanding the difference.Thanks.

The specific gravity is normally defined as the ratio between the weight of a given volume of material and the weight of an equal volume of water.

The determination of Specific Gravity of Cement as per IS Codes with the... (More)

Number of Boreholes

1-Time allocated for investigations

2- Cost

3- The structure for which the investigation is conducted

4- and sometimes the availability of necessary equipment and individuals with adequate skills and experience.

5- Geological Conditions

Borehole numbers are assumed... (More)