Log in to ask Henry Newman questions publicly or anonymously.
Wrought iron is a tough malleable form of iron which contains very less carbon percentage of 0.05 to 1%.
It is very soft in nature and have high tension strength.
It is also magnetic and ductile in nature.
Interpolation of the contours is the process of spacing the contours proportionately betn the plotted ground by indirect methods. The methods of interpolation are based on the assumptions that the slope of ground betn 2 pts is... (More)
Hi,
Nice to read your answer to your question.
I would like to add some significant mistakes that freshers civil engineers/architectures make while drawing plan
Slope stability is simply an ability of soil that can resist surcharge load and the self-weight of soil mass, especially in a predetermined slope. Some methods are used to calculate the slope stability. e.g., slip circle method.... (More)
Hi Ray,
Basically the artificial intelligence systems are used to protect many aspects of geotechnical Engineering
We can use artificial intelligence in that field where uncertainty exist such as Rock and soil properties
We can... (More)
Definition:
In rock or soil, the pressure exerted on its surroundings by water which is held in pore spaces.
Types of pore water pressure:
Definition:... (More)
Hi, this is the general question asked many times by fresher student.
Generally, the art architecture syllabus is focused on interior and exterior designing of buildings. Architecture designs and looks for aesthetic beauty.basically, their syllabus is concerned with interior designing... (More)
Plasticity chart is a graph between plasticity index (IP) and liquid limit (WL) in percentage which is used for classification of fine-grained soils as per the Indian Standard Soil Classification System(ISSCS). If more than 50% percent of soil passes through... (More)
“will not only not reduce the fire resistance of the material, but will increase the fire resistance of the material”.
This sounds like rubbish, please explain.
The following are the most economical way of roofing for rural areas :-
1. Partial roofs
2. Slate roofs
3. Porches
4. Stone roofs
5. Galvanized roofs
6. Tile stone coated roofs
STRAND 7 is a software used for finite element analysis(FEA) developed by a strand 7 company.
Following are some solvers used for micro modelling in strand 7.
There are two types of Tiles used in bathrooms
a) Bathroom wall tiles
b) Bathroom floor tiles
Let’s take about bathroom floor tiles
Bathroom floor tiles are primarily used for two purposes, one they should have antiskid properties, two they... (More)
The main reinforcement should be provided on a longer span because of the following reason:
Though self compacting concrete is used, these bulbs may not be filled completely. So, reinforcement is lowered after concreting, after clearing the muck on top, if any, either by vibration or driving, so that concrete is forced into the bulb.... (More)
Dear student,
Nowadays we use IS 3370:1965 for water tank design which permits only the working stress method.
The reason behind the design of water tanks using the working stress method only are as follows;
Guniya means diagonal checking of the rectangular area. It is based on Pythagoras theorem it is also called the 3,4,5 rule. In Pythagoras theorem a22+b22= c22
Suppose we want to check the diagonal of a building. Its length is 10m... (More)
Aggregates less than size 6mm is called as Grit, while agg’s more than 6mm in size is termed as Kapchi. Words Grit & Kapchi instead of Aggregates are normally used in Asphalt road works rather than in cement concrete works.... (More)
The beam whichis built at plinth level is known as plinth beam. In framed structure, plinth beam is the 1st beam built after foundation.
It is also r/f’d concrete beam constructed betn the wall & foundation & sometime... (More)
Crazing crack is surface crack of plaster.
It is due to
